Part Number: 2-4800DHMKV
Cleaning Path:
48 inch
Production Capacities: Concrete:
Light to medium blast, up to 30,000 sq. ft./hr.
1/8 inch removal: up to 10,000 sq. ft./hr.
1/4 inch removal: up to 6,000 sq. ft./hr.
SSPC-SP 10/NACE 2: to 7,500 sq. ft./hr.
Nonskid removal: 1,000-2,000 sq. ft./hr.
Blast Wheels: 2- 19½ in. diameter, single-sided, 12 blades
Travel Speed: 0-370 ft./min.
Engine: 9 liter, 6 cylinder, 350 hp
Fuel: Diesel, 100 gallons
Voltage: 12 VDC; 24 VDC; 110 VAC
Steel Shot Capacity: 1,200 lb.
Shot Sizes: S330-S550
Dimensions: Overall L 18 ft.10 in. x 8 ft. 2 in. x 9 ft
Blast Head: L 5 ft.10 in. x W 5 ft. 7 in. x H 6 ft. 9 in.
Chassis Al: L 15 ft. 10 in. x W 8 ft. 2 in. x H 9 ft.
Weight: Total 25,500 lb.
Blast Head:5,300 lb.
Chassis: 20,200 lb.
Dust Collector: 3,500 cfm at 25 inH2O static pressure
Uses 12- 36” cartridge style filters|
Automatic pulse jet cleaning
Optional screw conveyor for dust handling               

Blastrac 2-4800DHMKV Ride-On Shot Blaster             

The Blastrac® 2-4800DHMKV is one of our most productive surface prep machines for the professional contractor. With its wide 48 inch blast pattern, shot blasting with the 2-4800DHMKV is now, more than ever, an effective surface preparation method for even the largest jobs. This machine is capable of reaching very high production rates with ease. The machine strips, cleans and profiles simultaneously, leaving the surface immediately ready for the application of coatings or overlays.

The power and maneuverability of the 2-4800DHMKV make it suitable for a wide range of surface preparation applications such as: bridge decks, highway entrance and exit ramps, steel ship decks, barges, and other marine vessels, nonskid removal from military and commercial vessels, and large industrial plant floors. It is specifically suited for road ways and airport surface texturing.


  • 48” blast pattern/cleaning path offers great efficiency
  • Prepares up to 24,000 to 26,000 sq. ft./hr.
  • 0 to 370 ft./min. travel speed
  • Blast-head leveling system
  • Adjustable blast wheel speed, machine travel speed, shot feed levels and type of shot used 


  • Three wheel system with rear steering for small turning radius and superior maneuverability
  • Dual access doors allow easy loading of shot
  • Dust collection unit, switch-controlled emptying by operator
  • Blast within 5” of a wall or obstruction located on either side of the machine
  • For use on concrete, asphalt or steel substrates
  • A high-speed travel switch helps ensure uniform preparation by allowing for quick repositioning after each pass, without resetting the travel speed